23 Craig St, Unit 3, Brantford, Ont., Canada, N3R 7H8
Tel:519-751-3405 Fax:519-751-3443
The Authorized Canadian Distributor of Mycelx Products®
The Mycelx Compound
Technical Articles
Mycelx Products
Products Overview
Industrial Applications
Marine Applications
Oil Spill Remediation
Airborne Oil Mist Filter
Stormwater Filtration System
Filter Housings
Engineered Systems
Case Studies
Tramp Oil Removal
Dust in Compressed Air
Bilge Water from Drill Ship
PCB's from Water
PCB's from Water-electric
Oil Spill from Water
Radionuclides in Water
Frequently Asked Questions
Contact Us
Industrial Fluid Treatment Applications
|
raw
BTEX to crude oil, sheen, chlorinated solvents, PCBs, POPs, TBT, and
organically bound metals from wastewater. The technology allows the
filters to permanently remove the pollutants in a single pass with
less than 1 psi of pressure drop (even when fully saturated). Saturated
MYCELX cartridges and can be safely incinerated and even used to generate
energy due to their high BTU content.Water Filter Cartridges for Industrial Waste Water Treatment Systems
MYCELX cartridges can be applied to tank berms, waste drums, rinse water, loading and unloading berms, process water. Specific cartridges are offered for bilge water, machining fluids, stormwater, compressor condensate, PCB contaminated water, and high temperature water.E.M.R.P. Inc. offers a full line of 316 stainless steel cartridge systems with single unit flow rates from less than 1 gpm to 780 gpm. The cartridges are also available in bulk and are designed to fit standard 10", 20", and 30" DOE (double open end) housings.
MYCELX Industrial Waste Water FilterMYCELX 5 Micron Industrial FiltersAll MYCELX industrial filters are engineered to remove hydrocarbons ranging from gasoline to oil from water in a single pass. MYCELX instantly solubilizes the PCB compounds and bonds them to its surface, keeping them from separating and emulsifying. MYCELX is also able to remove Sheen, Synthetic and Natural Oils, BTEX, PCBs, Chlorinated Solvents, and organically bound metals.Technical Data for Industrial Filter
Some Applications Involving Hydrocarbon Removal:
|
MYCELX Industrial ApplicationsIndustrial Filter - High TempAll MYCELX industrial filters are engineered to remove hydrocarbons ranging from gasoline to oil from water in a single pass. The MYCELX HT filters were designed for water streams up to 200 Degrees Fahrenheit. MYCELX instantly solubilizes the hydrocarbon compounds and bonds them to its surface, keeping them from separating and emulsifying. MYCELX
can also remove mechanical emulsions, Chlorinated Solvents, PCBs,
and organically bound metals.
Industrial Filter - Technical Data:Flow Rate: 5 gpm or less recommended per 10” lengthMax. Temperature: 200 Degrees Fahrenheit (93.3° C) Construction Material: String Wound PolyPropylene over 304 S/S Core Pore Size: 5 micron Filter Length: 10” + 30” Filter Diameter: 2 5/8” The filters are designed to fit standard 10” + 30” DOE (Double Open End) filter housings Some applications involving hydrocarbon removal:
M1030-HT (Case of 30) 10” MYCELX HT Filters M3015-HT (Case of 15) 30” MYCELX HT Filters back to top |
MYCELX Industrial ApplicationsTechnical Data on S/S Industrial Waste Water Treatment UnitsMYCELX industrial filter cartridges are engineered to remove hydrocarbons ranging from oil to gasoline from water in a single pass. MYCELX instantly solubilizes the hydrocarbon compounds and bonds them to its surface, keeping them from separating and emulsifying. MYCELX is also able to remove Sheen, Synthetic and Natural Oils, BTEX, PCBs, Chlorinated Solvents, and organically bound metals.
Industrial Filter Cartridge technical Data:
Applications:
Specifications:
|
MYCELX Industrial ApplicationsM30 PCB Pollutant Removal Industrial Water FiltersAll MYCELX industrial water filters are engineered to remove hydrocarbons ranging from gasoline to oil from water in a single pass. The MYCELX PCB filters were designed to remove low levels of all types of PCBs (Polychlorinated Biphenyls) down
to allowable discharge levels (typically 0.5 ppt). MYCELX instantly
solubilizes the PCB compounds and bonds them to its surface, keeping
them from releasing. MYCELX PCB filters can also remove low level
BTEX (Benzene, Toluene, Ethylbenzene, & Xylene) components.
Industrial Water Filter - Technical Data:Flow Rate: 5 gpm or less per 30” cartridgeMax. Temperature: 140 Degrees Fahrenheit (60° C) Construction Material: String Wound PolyPropylene over PP Core Loading Capacity per Cartridge: 300 g PCBs 360 g BTEX & light hydrocarbons Filter Length: 30” Filter Diameter: 2 5/8” The filters are designed to fit standard 30” DOE (Double Open End) filter housings Disposal: MYCELX PCB filters incinerate down to .2 % ash value Some Applications Involving PCB Pollutant Removal :
Part Numbers: M30PCB-1 (Each) 30” MYCELX PCB Filters M30PCB-15 (Case of 15) 30” MYCELX PCB Filters M10PCB-PTF (Each) 10” Pilot Test Filter & Housing 3/4” NPT Inlet/Outlet back to top |
MYCELX Industrial ApplicationsCompressor CondensateClean oily Compressor Condensate with CompressorKleen Patented MYCELX Filter Unit that easily Installs in your Condensate Vent Line for the Removal of Oily Discharge
|
MYCELX Industrial ApplicationsStainless Steel CompressorKleenFor Removal of Oil from Compressor condensate and compressed airTwo Uses:Compressor Condensate - Install in condensate  purge
line to remove oil before discharge to the sewer. The CompressorKleen
stops oil from illegally escaping down the drain.Compressed Air - Install in compressed air line to remove oils that can foul up and damage air powered equipment and contaminate air powered processes. Keeps oil from contaminating painting processes, filters, pneumatics, and forced air drying processes.
|
MYCELX Industrial Applications
Patented MachineKleenClean Tramp Oil out of Cutting and Machining Fluids With MachineKleen
back to top |
MYCELX Industrial ApplicationsMYCELX EB MachineKleen CartridgesFor Semi-Synthetic and Mineral Oil Based Machining Fluid Tramp Oil Removal Mycelx EB MachineKleen Cartridges are engineered to remove tramp oils from Semi-Synthetic and Mineral Oil(natural) machining fluids. These macining fluids typically emulsify and hide a percentage(1-10%) of the tramp oils causing heat transfer, quality, and lubricity issues. The Mycelx cartridge instantly removes these emulsified tramp oils, but leaves the machining fluid package fully intact.Technical Data 
Flow rate: 1-3 gpmCartridge Availability: 10" standard, 10" BB Style, 20" BB Style The filters are designed to fit standard 10" housings or standard 10" and 20" BB style housings.
back to top |
MYCELX Industrial ApplicationsMYCELX P2 Hydrocarbon Removal Bag FilterFor Quick Knockdown of High Oil ConcentrationsThe Mycelx P2 Hydrocarbon Bag Filter has been engineered to remove free and separate phase oils from wastestreams. The Mycelx P2 Bag Filter removes 85-95% of all oils in a single pass. |
|
| Technical Data: Flow rate: 1-20 gpm Pressure Required: 5 psi max. Gravity Flow Capable: Yes(up to 5 gpm) Availability: #2 Trade size bag filter Capacity: 15-45 lbs. of oil Fittings: 2" NPT Female Housing Material: 304 SS Bag Material: PP bag/ Mycelx PermaKleen filled
|
 
|
| Note: In order for the P2 to function to full efficiency, it
must be used in the Mycelx MX-P2 Bag Housing. back to top |
MYCELX Industrial Applications |
|
PermaKleenPermaKleen has been designed for hydrocarbon removal from a wide range of filtration applications including storm drain cisterns, bag filtration systems and packed columns. |  |
|
As pollutants come in contact with the Mycelx, they are solubilised into the
infused coating, making them hydrophobic and thickening them so they will not
re-disperse into the solution. A low ash content and potentially high oil content
makes incineration an attractive option for used material. back to top |
 |
MYCELX Industrial ApplicationsHRT Hydrocarbon Removal Tube |
|
|
For Quick Knockdown of High Oil Concentrations
The Mycelx HRT has been engineered to remove free and separate
phase oils from vapour and liquid wastestreams. The Tube can be mounted in any orientation during
process flow. The Mycelx HRT removes 80-90% of the oils in a single pass. Technical Data: Flow rate: 5 gpm Head Required: 3 psi max. Gravity Flow Capable: Yes(up to 2 gpm) Availability: 34.5" long tube w/2" Socket Weld Fittings Capacity: 15-30 lbs. of oil Fittings: 2" NPT Female Construction Material:4" PVC Tube filled with PermaKleen.
back to top |
|
MYCELX Industrial ApplicationsPowerSolve Solvent
PowerSolve is an industrial strength non-emulsfying cleaning
solvent that relies on our patented MYCELX technology for unequaled
cleaning performance. PowerSolve is designed NOT to emulsify in water
so separation is simple with standard gravity techniques or with MYCELX
cartridges and remediation products. Simply spray PowerSolve on the
surface and allow it to dissolve the heavy layers of pollutants.PowerSolve
contains NO Carcinogens, NO Chlorinated Solvents, NO Toxins, and is
TOTALLY Biodegradable.
PowerSolve™ is a high strength oil solvent made from 100% natural incredients. PowerSolve™ is excellent for cleaning all types of oil including heavy crude and asphalt. PowerSolve™ contains no carcinogenic or ozone depleting chemicals and is fully biodegradable. Usage DirectionsCleaning Oil Surfaces1. Spray PowerSolve™ on oil coated surfaces 2. Wipe clean Oil Stained Surfaces 1. Spray PowerSolve™ on a rag 2. Wipe the surface 3. For plastic surfaces, wipe again with a clean, dry cloth Heavy Crude Coated Surfaces 1.Spray PowerSolve™ directly on heavily coated surfaces until oil begins to run 2. Wipe clean Removing Grease, Wax, Dirt, and Adhesives 1. Spray PowerSolve™ directly on the residues and allow to penetrate 2. For stubborn soils wait longer and then use a rag wipe away the loosened soils Hard to Reach Areas 1. Attach supplied extension tube to spray head 2. Use the extension tube to pinpoint the spray for precision application back to top |
||||
The information & recommendation set forth herein are presented in good faith and believed to be correct and reliable. E.M.R.P. Inc./ MYCELX Technologies Corporation makes no representation as to the completeness or accuracy thereof and supplies information upon the condition that the persons receiving same will make their own determination as to its suitability for their purpose prior to use.